Zhejiang Babysun New Energy Technology Co., Ltd.
Zhejiang Babysun New Energy Technology Co., Ltd.
Add to Cart
Eco friendly flat plate solar water heater blue titanium flat plate solar collector
Water heaters are indispensable equipment in every hotel room. Blue titanium flat plate solar collector for hotel is easy to use, energy-saving and efficient. They are a must-have option for many families to install hot water. Blue titanium flat plate solar collector for hotels have also become popular products. Therefore, it is very necessary to understand the use of some solar water heaters to reduce the number of repairs and save hotel expenses. Let's take a look at what they have.
Cold and hot water adjustment: The water temperature adjustment steps of the blue titanium flat plate solar collector for hotel are: first open the cold water valve, adjust the cold water flow appropriately, and then open the hot water valve to adjust until the desired bath temperature is obtained. Note that the spray head should not face the human body to avoid burns. Adjust the water temperature with cold water when taking a bath. In addition, it can be used as a water storage tank when the water is stopped. It can also precipitate water impurities in areas without tap water.
Wind resistance measures: due to the reliable connection of the solar water heater components, the wind resistance performance mainly depends on its installation and fixing method. The currently used 8 # galvanized iron wire and extended expansion bolts are fixed, forming a figure eight front and back, good wind resistance, but Take good waterproof measures. In addition, in areas with strong winds such as coastal areas, change the support structure, or remove the reflective plate, and fix it with steel strands used to fix telephone poles. The effect is better.
(1)Technical Specification:
Water Tank
1. Inner Tank:
Food grade SUS 304 stainless steel/316 stainless steel, 1.2mm, diameter 360mm
Out Tank: Galvanized steel/201 stainless steel/304 stainless steel, 0.4mm, diameter 460mm
Insulation: 50mm high-density polyurethane foamed
Inlet&Outlet: 1/2” or 3/4”, stainless steel
Copper Coil: Single copper coil or double copper coil
2. Flat Plate Solar Collector
Dimension L*W*H (mm): 2000*1000*80
Cover Material: Low iron, tempered glass
Surface Treatment: Black chromed/blue film
Header: Copper TP2 22mm* 0.6mm (6 pcs)
Riser: Copper TP2 22mm* 0.6mm (6 pcs)
Insulation: Fiber glass
Casing: Anodized aluminum alloy frame
Bracket: Galvanized steel sheet, 1.5mm/201 stainless steel, 1.2mm/aluminium alloy, stainless steel screws & nuts
3. Accessories
Electric heater, magnesium anode,TP valve, working station(include digital controller, circulation pump, expansion vessel, safety valve & fittings) and so on
| Model | Flat Plate Solar Collector | Collector Bracket | Pressurized Water Tank (No Coil) | Accessories | FOB shanghai /USD for 40HQ container |
| BS-FPC-P 100L | 1*BS-FPC-1 | 1 | FPC-P 100L | Do not include | US$224.00 |
| BS-FPC-P 150L | 1*BS-FPC-1.25 | 1 | FPC-P 150L | Do not include | US$284.00 |
| BS-FPC-P 200L | 2*BS-FPC-1 | 2 | FPC-P 200L | Do not include | US$410.00 |
| BS-FPC-P 250L | 2*BS-FPC-1.25 | 2 | FPC-P 250L | Do not include | US$479.00 |
| BS-FPC-P 300L | 3*BS-FPC-1 | 3 | FPC-P 300L | Do not include | US$588.00 |
FPC Flat Plate Solar Collector
| Item | BS-FPC-1.25 | BS-FPC-1 | |
| Riser Pipe Type | GRID | ||
| Length×Width×Height (mm) | 2000×1250×80 | 2000×1000×80 | |
| Header Pipe Material and Qty. | Copper TP2, Ø22 mm (2 pipes) | ||
| Riser Pipe Material and Qty. | Copper TP2, Ø8 mm (9 pipes) | Copper TP2, Ø8 mm (7 pipes) | |
| Gross Area (m2) | 2.5 | 2.0 | |
| Absorber Area(m2) | 2.27 | 1.82 | |
| Net Weight (kgs) | 35 | 30 | |
| Liquid Capacity (ltr) | 1.53 | 1.23 | |
| Surface Treatment | Sputtering (Blue Titanium Absorber) (Bluetec) | ||
| Absorber Plate Material | Aluminum Board | ||
| Absorptivity | ≥95% ±2% | ||
| Emissivity | ≤5% ±2% | ||
| Frame Material | 6063 T5 Aluminum Profile,Thickness : 1.2mm | ||
| Back Plate | Galvanized Steel | ||
| Insulation Material & Thickness & Density | Fiber Glass 30mm,Density:36g/m3 | ||
| Transparent Cover | Super White Low Iron Embossed Tempered Glass, δ3.2mm, Light Transmission ≥ 91.5% | ||
| Instant Thermal Efficiency (η) | 0.79 | 0.77 | |
| Heat Transmission Medium | 70% Propylene Glycol+30% Pure Water | ||
| Test Pressure (Mpa) | 1.2 Mpa, and Keep 15 Minutes | ||
| Working Pressure (Mpa) | 0.7 | ||
| Advising Flow Rate (L/H- m2) | 70～80 | ||
| Heat Loss Coefficient a1* (w/ m2.℃) | 3.25 | 5.00 | |
| Collector Stuffy Temperature (℃) | 190 | 180 | |
FPC-P Series Pressurized Water Tank
| Model | Inner Tank | Insulation Layer | Outer Tank
| Coil Length | Tank Height | ||||
| Inner Dia. (mm) | Thickness (mm) | Thickness (mm) | Out Dia. (mm) | Thickness (mm) | Single Coil (mm) | Dual Coil (m) | (mm) | ||
| Lower(mm) | Upper (mm) | ||||||||
| FPC-P 100L | 360 | 1.0 | 55 | 470 | 0.5 | 20 | 15 | 10 | 1060 |
| FPC-P 150L | 360 | 1.2 | 55 | 470 | 0.5 | 20 | 15 | 10 | 1450 |
| FPC-P 200L | 450 | 1.5 | 50 | 550 | 0.5 | 20 | 15 | 10 | 1340 |
| FPC-P 250L | 480 | 1.5 | 50 | 580 | 0.5 | 25 | 18 | 12 | 1450 |
| FPC-P 300L | 480 | 1.5 | 50 | 580 | 0.5 | 25 | 18 | 12 | 1700 |
| FPC-P 400L | 580 | 2.0 | 60 | 700 | 0.5 | 30 | 20 | 15 | 1560 |
| FPC-P 500L | 580 | 2.0 | 60 | 700 | 0.5 | 35 | 25 | 15 | 1890 |
| FPC-P 600L | 580 | 2.0 | 60 | 700 | 0.5 | 35 | 25 | 15 | 2176 |
| FPC-P 700L | 645 | 2.0 | 60 | 750 | 0.5 | 40 | 28 | 17 | 1920 |
| FPC-P 800L | 800 | 2.0 | 100 | 1000 | 0.5 | 45 | 30 | 20 | 1860 |
| FPC-P 1000L | 800 | 2.5 | 100 | 1000 | 0.5 | 50 | 35 | 25 | 2100 |
| FPC-P Series Pressurized Water Tank Specification | |||||||||
| Inner Tank | Food grade SUS 304-2B stainless steel | ||||||||
| Out Tank | Galvanized steel | ||||||||
| Insulation | High-density polyurethane foamed | ||||||||
| Inbuilt Heat Exchanger | Copper or stainless steel (Φ12/16/19/25mm) | ||||||||
(2) Optional Accessories and their Function:
PT valve: temperature and pressure safety valves, with dual temperature and pressure protection;
Electric backup: to heat water when rainy and cloudy days;
Magnesium bar: to soften water in hard water area;
TK-8A/TK-7/TK-5 digital controller: to control water level, feed water automatically and control the operation of electric heater at a certain tempeature as we except
Check valve: to prevent hot water from flowing backwards
(3) Application:
The main use is for family use, such as bathing, cloth washing and so on.
Solar water heater with assistant tank model is widely used in apartment, hotel and school.
Also it can be used for swimming pool, farm.
FAQ:
1- What is your Delivery Time?
LCL order/Sample order: within 7 days.
Full container order: 7-14days.
2- What is your Guarantee Time?
5 years.
Provide you with 1%-2% extra accessories and vacuum tubes, they are free for you.
3- Can you accept OEM ?
YES.
4- What is your Payment Term?
We accept T/T or L/C at sight, Western Union.
5- What is your MOQ?
1 set.
6- What is your Packing?
LCL order/Sample order in wood cartoon.
Full container order in high quality standard export carton.
7- What is your FOB Port?
We accept FOB Shanghai, Ningbo etc.
8- What is your Monthly Production Capacity?
10000 sets.
9- What is your Shipping Term?
By Sea/Air/Rail.